Products
Two rigid PVC sheets, 0.035–3.00 mm
One sheet is formed into cooling tower fill; the other is converted into packaging, folding boxes and glazing. They are different compounds, not the same sheet at two thicknesses — a fill sheet has to hold a corrugation when it is wet and warm, a clear sheet has to stay clear through a forming line. Use the table to check thickness and width, then open the product page for tolerances, applications and the datasheet.
Complete specification table
Thickness in millimetres, width in millimetres, forming method. The datasheet for the exact gauge is issued with the quotation.
| Product | Thickness (mm) | Max width (mm) | Forming | Surface | Typical use |
|---|---|---|---|---|---|
| Cooling Tower Sheet | 0.38 – 0.50 | 1300 | Vacuum forming, corrugated or embossed | Smooth or embossed; black, grey, blue or clear | Counterflow and crossflow cooling tower fill, HVAC towers |
| Super Clear Rigid Sheet | 0.035 – 3.00 | 2000 | Vacuum forming, folding, printing | Crystal clear, glossy on both faces | Blister and pharma packaging, folding boxes, glazing, signage |
Packing: rolls wrapped in plastic film and standing on pallets, or cut sheets. MOQ 1,000 kg, trial order 300 kg, 2 weeks and up after deposit.
Choose by process, not by product name
Most enquiries start with the machine the sheet will run on. Start there instead.
Film fill for cooling towers
0.38–0.50 mm and 500–1300 mm wide, formed into corrugated or cross-fluted packs for counterflow, crossflow and HVAC towers.
Replacement fill projects
Send a sample of the fill already in the tower, or the drawing with pitch and flute angle, and we match colour and gauge before quoting.
Blister, folding boxes and printing
0.035–0.50 mm for converting lines, where gauge consistency and heat sealing matter more than stiffness.
Glazing, guards and signage
0.80–3.00 mm clear sheet cut and formed into machine guards, panels and display work.
Not sure which grade fits your part?
Send the drawing, the forming process and the monthly quantity. We reply with the grade, the thickness window and a price — usually within 24 hours.
Ask an engineer

