
Product
Super Clear Rigid Sheet
Crystal-clear rigid PVC sheet from 0.035 mm to 3.00 mm, in rolls 300–2000 mm wide and 30–500 kg. Made from 100% virgin compound with no filler and no regrind — density 1.38–1.40 g/cm³, about 70% that of glass — for blister packs, folding boxes, printing, glazing and machine guards.
Specification
Values below are for the standard grade. Confirm thickness, width and forming against your own process before ordering; a datasheet is issued for the exact gauge quoted.
| Material | 100% virgin PVC compound, no filler and no regrind |
| Type | Rigid, unplasticised |
| Colour | Transparent clear; tinted or opaque on request |
| Thickness | 0.035 – 3.00 mm |
| Width per roll | 300 – 2000 mm |
| Weight per roll | 30 – 500 kg |
| Density | 1.38 – 1.40 g/cm³, about 70% that of glass |
| Surface | Glossy on both faces; embossed or matte on request |
| Packaging | Rolls wrapped in plastic film, or cut sheets on pallets |
| Production capacity | 500,000 kg per month |
| Delivery | 2 weeks and up after deposit |
| Payment | TT, L/C, Western Union, MoneyGram |
| MOQ / trial order | 1,000 kg / 300 kg |
Rigid means no plasticizer — that is where the clarity comes from
PVC on its own is glass-clear, stiff and dimensionally stable. Add plasticizer and it becomes flexible film; leave it out and you keep the clarity and the rigidity. Clear rigid PVC, transparent vinyl sheet and rigid PVC film are the same polymer described three ways — vinyl is simply the older trade name for PVC.
We run 100% virgin compound with no filler and no regrind. Density is 1.38–1.40 g/cm³, about 70% that of glass, which is why thinner gauges of rigid PVC can replace glass or acrylic without giving up the strength the job needs.
Gloss and gauge
Both faces are glossy straight off the line. Thin gauges hold a mirror finish; above about 1 mm, faint flow marks are normal and are not a defect unless the part is looked through.
Tolerance
The same absolute error is a bigger share of the section on thin gauges, so tolerance tightens as the gauge drops. Tell us the gauge you run and we quote the tolerance we can hold on it.
Two businesses inside one thickness range
0.035–0.5 mm goes to converting lines: blister and pharmaceutical packaging, folding boxes, printing and lamination. These buyers care about gauge consistency, heat-sealing behaviour and how the ink keys to the surface, not about stiffness.
0.8–3.0 mm goes to glazing, machine guards, signage and fabricated parts, where the sheet is cut and formed rather than run through a packaging machine. The two ends of the range are not interchangeable, so say which side you are on when you enquire.
Yellowing is a UV question, not an age question
Behind glass or indoors, the standard compound stays clear for years. In direct sun it shifts, and it shifts faster once the surface runs hot. If the part faces daylight, ask for the UV-stabilised grade at the enquiry stage — it is a different compound, not an additive stirred in later.
We send an A4 sample of the exact grade so you can judge clarity against daylight instead of on a screen. Colour is matched to a physical sample or to a retained master; a screen image is indicative only.
Where it goes
Four places this grade is bought for, and what changes in each.
Blister and pharmaceutical packaging
Thin gauges formed into blister pockets, where gauge consistency matters more than the last percent of clarity.
Folding boxes and stationery
Printed and creased sheet for folding cartons, report covers and spiral binders.
Glazing and machine guards
Heavier gauges cut and formed into safety guards, machine windows and clear panels.
Signage and display
Clear sheet behind printed graphics, shelf talkers and display panels.
Super clear rigid sheet — technical questions
Is transparent vinyl sheet the same as clear rigid PVC?
Yes. PVC is polyvinyl chloride and vinyl is the older trade name for the same polymer. Rigid means no plasticizer has been added — that is what keeps the sheet glass-clear, stiff and dimensionally stable.
Will it go yellow?
Indoors, or behind glass, the standard compound stays clear for years. In direct sunlight it will shift, and faster at high surface temperature. Specify the UV-stabilised grade if the part faces daylight; some shift after several years outdoors is normal even then.
What thickness and width can you supply?
0.035–3.00 mm thick, 300–2000 mm wide, 30–500 kg per roll. Rolls or cut sheets stacked on pallets, whichever suits your line. Narrow widths are slit from the same master roll.
Do you supply the sheet already creased for folding boxes?
We supply flat sheet and roll; creasing and folding happen on your line. Folding box work normally runs 0.2–0.5 mm — send the box and we will confirm the gauge and the surface finish.
What is the minimum order?
1,000 kg per specification, with a 300 kg trial order for a first run. Colour and gauge changes are quoted per run.
The other product
Most buyers order the same grade repeatedly; if you need both, they can share a container.
Ask for the Super Clear Rigid Sheet datasheet
Tell us the thickness, width, color and monthly quantity you need. We reply with the datasheet, unit price, freight and lead time — usually within 24 hours.
- Datasheet and test report for the exact grade
- Free A4 sample of standard grades
- Colour and grain matched to your physical sample

