Rigid PVC sheet · 0.035–3.00 mm · sheet up to 2,000 mm wideEN
Home/News/The difference between folding moulding and vacuum moulding PVC sheet

The difference between folding moulding and vacuum moulding PVC sheet

Both are rigid PVC sheet, but one is specified for folding boxes and the other for vacuum forming: different process, different stiffness, different failure mode.

Folding moulding PVC sheet and vacuum moulding PVC sheet are both rigid sheet based on polyvinyl chloride, but they differ in application, in manufacturing route and in the properties that matter.

Use. Folding moulding sheet goes into folding boxes, box packaging and folders — anything that has to crease cleanly and hold its shape on the shelf. Vacuum moulding sheet goes into blister and thermoformed packaging, display trays and shaped components, where the sheet has to draw over a mould without thinning out.

Process. Folding sheet is normally extruded: the melt is pressed into sheet, then cooled and cut to size. Vacuum forming is a converting step rather than a sheet-making step — the sheet is heated until it softens, drawn onto the mould, held by negative pressure and cooled in shape.

Properties. Folding grades are specified for stiffness, so the crease stays sharp and the box does not sag. Vacuum grades are specified for elongation and hot strength, so the material follows complex curves and corners without webbing or rupture.

Choosing between them is a question about your machine, not about price. A folding grade run on a thermoformer will thin out at the corners, and a forming grade folded on a box line will whiten along the crease.

Written by the technical sales team at Nantong Helia Plastic Co., Ltd., No.8 Taoyuan Road, Nantong City, Jiangsu Province, China. Questions about a specific grade can go to harry@helia-plastic.cn.

More notes

The loading of PVC rigid sheet for cooling towers

Rigid PVC sheet for cooling towers, produced to customer requirement, is shipped every month — in black, grey, blue and transparent, packed on strong pallets.

MosBuild 2024, ready

MosBuild 2024 in Moscow — 29 years of building and finishing materials under one roof, 15 thematic sections, and the place where rigid PVC sheet specifications are settled.

Development trend of PVC medicinal sheet

PVC medicinal sheet is the standard material for blister packaging: one tablet per cavity, more than 95% of domestic PTP material, and a compound that is about 90% PVC resin.

PVC rigid sheet down to 0.05 mm

After equipment and process changes we now produce rigid PVC film at 0.05 mm, at a quality we are willing to put on a datasheet.

Advantages of using preformed PVC fill for biological wastewater treatment

Preformed PVC fill gives biological wastewater treatment a large biofilm surface, corrosion resistance and a smaller plant footprint than conventional media.

Advantages and applications of PVC rigid sheet

Durability, chemical resistance, printability and cost — why rigid PVC sheet turns up from blister packs to window frames, and where it should not be used.

Send your specification, get a quote in 24 hours

Thickness, width, color and monthly quantity is enough to start.

Request a quotation