+86 513 8570 7818·harry@helia-plastic.cnEN
Home/Products/Antiflaming Insulation Cover Film

Product

Antiflaming Insulation Cover Film

Flame-retardant rigid PVC film that jackets and protects as one layer, 0.1–0.5 mm thick, 300–2000 mm wide and 50–500 kg per roll. It is rated UL94 V-0, tested to ASTM E84 and stable to 105 °C, so it covers pipe insulation and cable runs, lines clean rooms and machine enclosures, and laminates onto panels — without adding fuel to the space it protects.

0.1 – 0.5 mm (100 – 500 micron)UL94 V-0 · ASTM E84Up to 105 °C300 – 2000 mm
Key specification
Thickness0.1 – 0.5 mm (100 – 500 micron)
Flame ratingUL94 V-0 · ASTM E84
Heat resistanceUp to 105 °C
Width per roll300 – 2000 mm
Weight per roll50 – 500 kg
ColourSolid colours, decorative texture or clear
MOQ1,000 kg
Lead time2 weeks and up

Specification

Values below are for the standard grade. Confirm thickness, width and forming against your own process before ordering; a datasheet is issued for the exact gauge quoted.

Material100% virgin PVC compound with a flame-retardant additive package
TypeRigid, unplasticised
Flame ratingUL94 V-0 and ASTM E84
Surface spreadASTM E84 — flame spread 0–25, smoke developed 0–450
Heat resistanceUp to 105 °C
ElectricalStable dielectric properties
ColourSolid colours, decorative texture or clear
Thickness0.1 – 0.5 mm100 – 500 micron
Width per roll300 – 2000 mm
Weight per roll50 – 500 kg
SurfaceSmooth or decorative texture
OptionsUV resistance, anti-fingerprint, antibacterial, anti-static
PackagingRolls wrapped in plastic film and kraft paper or cut sheets
Production capacity1,000 tons per month
Delivery2 weeks and up after deposit
PaymentTT, L/C, Western Union, MoneyGram
MOQ / trial order1,000 kg / 300 kg

One film, three jobs

This grade began as an insulation cover: a thin flame-retardant film wrapped or formed over pipe insulation, cable runs and equipment, where the jacket has to hold its shape, survive being handled and not feed a fire in a plant room or a tunnel. What buyers actually do with it is wider than that.

One roll jackets industrial pipe and duct insulation, wraps and separates cable runs as a dielectric barrier, and laminates onto panels, walls and cabinet faces as a cleanable surface. Three jobs, one compound — because the film is rigid, weldable on both faces and stable to 105 °C, it holds a formed shape, takes a welded seam and can sit against a hot line without sagging away from it.

Why the gauge sits at 0.1–0.5 mm

Below 0.1 mm the film is a wrap for cable and short runs, and the seam tears when it is opened for service. 0.2–0.3 mm is the working band for pipe jacketing and machine covers. 0.4–0.5 mm is used where the film is a free-standing partition or a panel face that has to stay flat.

Weldable on both faces, and why that matters

A jacket closed with a hot-air or wedge weld keeps the joint as strong as the film, which a taped seam does not. The same property lets a clean-room partition be welded into one sealed sheet with no gap for dust to collect in, and lets the finished surface be washed rather than replaced.

Flame, smoke and heat in an enclosed space

UL94 V-0 describes the film on its own: the flame is removed after ten seconds and a V-0 specimen has to stop burning within ten seconds, must not drip anything that ignites cotton below it, and must not burn up to the clamp. ASTM E84 describes a surface in a tunnel test instead — how fast flame travels across it and how much smoke it develops.

The second number is the one that decides most of these jobs. A clean room, a laboratory, a machine enclosure or a plant room is an enclosed space where people stay, and smoke is the first hazard there rather than flame. Slow spread and low smoke emission are what make a lining usable inside a room instead of only on an exterior.

Heat is a separate limit. The film is stable to 105 °C, which covers hot water pipe jacketing, covers near motors and lamps, and cable wrapping where the conductor runs warm. Above that the sheet softens and the jacket sags off the pipe, so if the service runs hotter, say so at the enquiry and we quote a different compound rather than let this one fail in place.

Colour, options and what to send

Standard supply is roll form in a solid colour or a decorative texture, and clear where the pipe or the cable underneath has to stay visible. Texture is not only cosmetic: a matte or embossed face hides scuffs on a machine cover and does not show dust the way a gloss face does.

The options are quoted as separate grades because each one changes the compound: UV resistance for outdoor runs, anti-fingerprint for panels and cabinet faces that get handled, antibacterial for clean rooms, and an anti-static combination that stops dust and lint settling on the surface — the one buyers ask for most in electronics and clean-room work.

For a quotation: what the film goes onto, the roll width your line runs, gauge, colour or texture, whether the joint is welded or taped, and the fire test the project cites. Where the film is laminated onto a panel, tell us the substrate and the adhesive, because the surface treatment is chosen against them.

  • Gauge: 0.1–0.5 mm
  • Width: 300–2000 mm
  • Roll weight: 50–500 kg, or cut sheets on pallets
  • Joint: welded or taped — the film welds on both faces
  • Fire test: say whether the project cites UL94 V-0, ASTM E84, or both
  • Quantity: 1,000 kg per specification, 300 kg for a trial run

Where it goes

Four places this grade is bought for, and what changes in each.

Pipe and duct insulation jacketing

Wrapped or formed over insulation on hot and chilled lines and closed with a weld, stable to 105 °C so it does not sag off the pipe.

Cable wrapping and electrical barriers

Wraps cable runs and separates conductors as a dielectric barrier, where leakage and voltage breakdown are the failure to design out.

Clean room, lab and booth partitions

Welded into partition panels and booth curtains for spaces that need a washable, flame-rated surface and low smoke emission.

Machine covers and panel faces

Covers for precision machinery and lamination onto furniture, wall and cabinet faces, in decorative texture or an anti-fingerprint finish.

Antiflaming insulation film — technical questions

What does antiflaming mean on this PVC film?

The compound carries a flame-retardant package, so the PVC film stops burning once the ignition source is removed instead of carrying the flame. It is rated UL94 V-0, tested to ASTM E84 with low flame spread and low smoke emission, and is intended for enclosed spaces — clean rooms, plant rooms, machine enclosures — not only for exterior use.

How is it different from your standard PVC insulation cover film?

The same base compound and the same roll form. What changes is the flame-retardant package, the 105 °C heat stability and the test documentation that comes with it. Where a project does not cite a fire rating, the standard grade costs less per kilo.

What thickness should I use?

0.1–0.2 mm for cable wrapping and short runs, 0.2–0.3 mm for pipe jacketing and machine covers, 0.4–0.5 mm where the PVC film is a partition panel or a face that has to stay flat. Send the job and we will confirm the gauge.

Can the PVC film be welded?

Yes, on both faces. Hot-air and wedge welding are both used, and the seam holds as well as the PVC film does, which is what makes a sealed partition or a jacket that survives being opened and re-closed possible.

Can it be made anti-static or dust-repellent?

Yes. An anti-static combination stops the charge that pulls dust and lint onto the surface, and it is quoted as its own grade because the additive changes the compound. UV resistance, anti-fingerprint and antibacterial treatments are available the same way.

What is the minimum order?

1,000 kg per specification, with a 300 kg trial order for a first run. Colour, gauge, surface and flame-retardant grade changes are quoted per run.

Ask for the Antiflaming Insulation Cover Film datasheet

Tell us the thickness, width, color and monthly quantity you need. We reply with the datasheet, unit price, freight and lead time — usually within 24 hours.

  • Datasheet and test report for the exact grade
  • Free A4 sample of standard grades
  • Colour and grain matched to your physical sample

Or write directly to harry@helia-plastic.cn
Call +86 513 8570 7818